Sentence examples for maximum heater temperature from inspiring English sources

At this condition, the maximum heater temperature is reduced to 36 °C.

The current thermosyphon with a porous insert can allow a heat flux of 112 W/cm2 to be removed with a maximum heater temperature of 90 °C.

With values of heat fluxes of 107 W/cm2 and 25 W/cm2 equally distributed on the four heaters, the maximum heater temperature measured is 53 °C at a saturation temperature of 45 °C.

A reference design and two variations of this design were characterised with regard to their power conversion efficiency, and to the correlation between the maximum heater cartridge temperature and the outlet temperature.

As an accident management measure, the auxiliary feedwater was supplied to the intact steam generator when the maximum heater surface temperature started to show an excursion behavior.

For the four power pistons engine, the results indicate that at the maximum actual heat input of 4041 J/s with the heater temperature of 771 K, the engine produces a maximum torque of 10.55 N m at 28.5 rpm, a maximum shaft power of 32.7 W at 42.1 rpm, and a maximum brake thermal efficiency of 0.809% at 42.1 rpm, approximately.

The results indicate that, for twin power piston engine, at a maximum actual heat input of 2355 J/s with a heater temperature of 589 K, the engine produces a maximum torque of 1.222 N m at 67.7 rpm, a maximum shaft power of 11.8 W at 133 rpm, and a maximum brake thermal efficiency of 0.494% at 133 rpm, approximately.

The heater temperature was 180 °C.

Heater temperature of the probe was set at 200 °C.

The flow rate of heated dry nitrogen gas (heater temperature 300°C) was maintained at 10 psig.

If the phenomenon continues, the heater temperature can be reduced to a minimum of 34°C.