Sentence examples for maximum hardness is from inspiring English sources

Importantly, a maximum hardness is discovered at the optimum Cr addition of ∼2.0 at.%.

The maximum hardness is observed on the sections of the HAZ 1 (coarse-grained) and 2 (fine-grained) adjacent to the weld metal, having an acicular structure.

For wet indentation, the maximum hardness is observed at the beginning of the indentation process and gradually decreases to a stable value of about 19.4 GPa.

The hardness of the SiCN films is found to increase with increasing silicon contents, and the maximum hardness is 35 GPa.

The maximum hardness is reached for VC coatings with C/V ratios around unity, decreasing for either higher or lower C/V ratios.

From the results of the experiments, it has been shown that the maximum hardness is approximately 824 Hv when the laser power, focal position and the travel speed are 1095 W, +1 mm and 0.3 m/min, respectively.

The maximum hardness was up to 34 GPa.

The achievement of the maximum hardness was related to the greatest GB solute segregation-induced strength contribution.

The maximum hardness was found to be 48.5 and 45 GPa for NbN and NbC, respectively.

A value up to 1350 HV 0.025 constituting a maximum hardness was obtained.

The maximum hardness was observed with the films deposited at the bias voltage of − 100 V.