Your English writing platform
Discover LudwigExact(6)
The geometry of the impeller-inducer combination has been optimized experimentally for maximum gas flow.
The surface coating was designed to allow a maximum gas flow through the diatomite sensors.
For the gas, however, there is a significant amount of cases (79%) that yield a production relatively close (within 8%) to the maximum gas flow rate detected (15,178 Sm3/d).
The maximum temperature and pressure that can be used within the specimen testing space are 900 °C and 7 MPa, respectively, and the maximum gas flow rate in the main loop is 38 kg/hr.
Samples of gas hydrates obtained at a maximum gas flow rate during the deposition contained up to 15 mass % of methane, 12 mass % of ethane, 13 mass % of propane, and 23 mass % of carbon dioxide.
Hypothetically, if phase 2 is shorter in heavy smokers, readings of PiCO+ may occur at the time of maximum eCO values and maximum gas flow and this may lead to the reversal of the difference with B&K.
Similar(54)
A cooling device should be designed for its maximum anticipated cooling duty (i.e., maximum expected gas flow and maximum expected gas temperature drop).
The maximum gas drainage flow for a single hole can reach 8.1 m3/min and the effective drainage distance can be extended up to 150 m or more.
The maximum gas drainage flow of a single hole can reach 8.1 m3/min, and the effective drainage distance can be extended up to 150 m or more. .
This parameter exhibits an optimum value, as its increase improves mass transfer, but reduces the maximum gas-induced flow rate.
The demand-flow system reduced inspiratory imposed WOB by 30% to 56%, inspiratory imposed PTP by 38%to59%9% and expiratory imposed WOB by 12%to49%9% compared to using a maximum possible continuous fresh gas flow of 60 l minute-1 (Table 1; Figure 4).
More suggestions(15)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com