Sentence examples for maximum frequency to from inspiring English sources

Figure 14 shows that the ratio of the maximum frequency to the minimum frequency for different workload profiles.

We also changed the frequencies from 100 Hz (maximum frequency) to 10 Hz. Figure 4 shows the high-speed motions of the end effector (100 Hz) in different amplitudes captured by a high-speed camera.

In our proposed estimation method, when there is no anchor for estimation such as the start time for decoding or the changing of a channel, decoding is performed by applying maximum frequency to a processor.

In the Fourier transform algorithm, as a typical example, we set the Hurst component to be H = 0.5, the maximum frequency to be w L  = 1/(24σ), the minimum frequency to be w H  = 1/(256σ), the standard deviation of the frequency amplitude to be P = 0.69, and the system size to be 512 × 512 atoms (with initial spacing equal to 1.12σ).

In addition, to quantify modulation of each syllable, we calculated the slope of the syllable from start point to end point (overall modulation), and from the point of maximum frequency to the point of minimum frequency (internal modulation; calculations and annotations described in Figure 1c).

The program is also designed to trim flanking sequences if they are not informative (if the ratio of maximum frequency to minimum frequency is <3).

The minimum and maximum frequencies to be analyzed by Fourier-ICA were 15 and 30 Hz.

Although heel-strikes repetitively occur at this rate only after an individual gait cycle, this does provide a maximum frequency at which to measure mechanical stiffness.

The dynamic range of the spectrometer was fixed in the interval 30 – 10000 ppm, as mainly limited from the maximum acceptable relative uncertainty of 10% for the retrieved concentration (lower limit), and from the maximum frequency scan to be imposed on the laser (fixed to 1 cm-1) (upper limit) in order to keep the tails of the absorption within.

The model was compared to Jakes' model, and it was shown that the Doppler power spectrum extends beyond Jakes' maximum frequency due to the movement of the surroundings, transmitter, and receiver.

This significantly reduced the maximum frequency error to only 4%.