Sentence examples for maximum fracture loading from inspiring English sources

The average maximum fracture loading to the femoral necks was lower in the OVX group compared with the sham group.

The maximum fracture load was measured by applying compressive load to the occlusal surface until the crown failed.

Nevertheless, T4 treatment resulted in gradual increases in yield load, maximum load, fracture load, and stiffness of bones from Thra1 PV /+ mice.

A fatigue limit of 25 MPa was determined for the AA5754/Ti6Al4V joints (at survival level of 50%), corresponding to 15% of the maximum average static fracture load.

For pure mode I loading crack growth continued far beyond the maximum fracture toughness shows that the predicted subsequent steady-state toughness is well below the maximum.

The relationship between torsional load and fracture occurrence followed a parabolic curve, and the maximum fracture torque and torsional yield strength of all sizes of implants were recorded (Fig. 2).

Compression at the fracture occurs during the healing process, under fracture loading.

Fracture loading, fracture resistance, load-to-failure, breaking strength, and fracture strength are considered synonymous terms.

The biomechanical results revealed that the energy to maximum load, energy to fracture load, and bending stiffness were decreased significantly.

The stiffness (load displacement curve slope, N/mm), the energy to maximum load, and the energy to fracture load were also calculated based on the parameters mentioned earlier.

The three-point bending test of the femur demonstrated that Dex treatment significantly reduced energy to maximum load by 34.4% and energy to fracture load by 46.3% compared to the Con treatment.