Sentence examples for maximum field width from inspiring English sources

The TomoTherapy unit provides a flattening-filter-free photon fan beam with a maximum field width of 40 cm and field lengths of 1.0 cm, 2.5 cm and 5.0 cm at a focus-isocenter distance of 85 cm.

For each study form, we developed a data dictionary that contained several elements, including the name, description, type, allowable values (range), and maximum field width for each variable.

For each study form, we gave each variable a short descriptive name, and developed a data dictionary containing several elements, including the name, description, type, allowable outcomes (range), and maximum field width for each variable [ 4- 6, 15, 18].

The C15 phase field is continuous between NbCr2 TiCr2, with a maximum phase field width of at least 7 at.% solubility.

Commonly, ND YAG is operated under the following parameters (oscillation wavelength is either 1064 or 532 nm, heat is 300 mJ, repetition rate is 10 Hz, field width half maximum (FWHM) is <10 ns, and focused beam diameter on target spot is 3 8 mm).

By varying the nanowire sizes we obtain the optimized side-length (width and height) for the maximum field enhancement with a given gap size.

Increased field width to 5.0 cm may shorten the duration significantly but the PTV coverage may reduce slightly or the maximum dose to PTV may increase by 10%15%%.

PDG simulated the maximum tree ring width for elevations between 1100 and 1420 m, which also corresponds to the maximum ring width observed in the field (Cailleret and Davi 2011).

However, in the Cooper's Hawk, the maximum binocular width was at elevation 70°, which made the binocular field noticeably wider above than below the plane of the bill (Fig. 1b, Fig. 2).

We measured sizes of webs for adult females in the field (height, width, distance from hub to top of web, maximum mesh width, number of radii, number of spirals, and height from ground), and then photographed each web for subsequent detailed characterization.

A maximum section width of 3 mm with a minimal or no inter-slice gap and a small field of view (FOV) are needed [15].