Sentence examples for maximum extraction at from inspiring English sources

Although the difference of extraction between the unmodified and modified cellulose matrix was enormous, all phases displayed their maximum extraction at pH 6.0 (Figure 6).

The optimal conditions to obtain the maximum extraction yield were at 240 bar, 60 °C, 500 μm, 10 ml/s and 100 min.

The maximum extraction efficiencies were achieved at 220 °C using conventional heating and 205 °C using microwave heating.

Under Box Behnken design, the model showed that maximum extraction ability was observed at 30 °C, 30 min and 1.0 of DMF/diesel ratio to achieved 67.5%.

The scope of current study was to apply supercritical CO2 for extraction of black poplar buds (Populus nigra L). and to optimize the extraction parameters (pressure and temperature) using response surface methodology aimed at maximum extraction yield, total phenolic content (TP), ferric reducing antioxidant power (FRAP) and individual amount of selected bioactive phenolics.

Figure 5 shows that in the range of pH from 3 to 7, the extraction yield was raised below pH 5 and reached the maximum extraction yield of 15.42 % at pH 5 and then it declined as it neared a neutral pH.

The maximum extraction efficiency of piazselenol was obtained at 20 μL of 1-octanol as the extracting solvent, 30 min extraction time, pH 2, stirring rate of 500 rpm and 30% (w/v) NaCl.

The results showed that at optimal conditions maximum extraction of 87% ± 5.5% Mo, 37% ± 2.6% Ni and 15% ± 1.3% Al were achieved after only 7 days of batch processing in the bioreactor.

The RSM predicted that the maximum extraction recovery of 34.13% was achieved at the optimal operating conditions to be the pressure of 19.3 MPa, temperature of 42.8∘C, CO2 flow rate of 1.9 ml/min and dynamic extraction time of 137.9 min.

At these conditions, extraction maximum extraction of total carotenoids as 163.47 mg/100 g dried peel.

At these conditions, the maximum extraction of the DCF was 99.65%.