Sentence examples for maximum external loading from inspiring English sources

The GEF is a dimensionless coefficient that quantifies the effect of turbulence on wind pressure distribution and enables the assessment of maximum external loading and internal forces in the structure from the analysis of the mean wind pressure scenario.

The power delivered is 0 for both an open circuit and a short circuit (infinite and zero external impedance) and is a maximum when the external load impedance matches the internal resistance of the fuel cell.

Maximum external pressure along the casing, psi.

The external loading may be random in nature.

The maximum external knee moments during DLs (Table  2) were comparable to knee moments in the studies of Escamilla and co-workers [ 1, 6], although they used much higher barbell loads.

Table 6 Comparison of the maximum amplitudes of vibrations with and without considering vortex effects when random external loads are applied   Maximum vibration amplitudes neglecting the vortex effects (m) Maximum vibration amplitudes taking into account the vortex effects (m) The structure with a TMD 2.59 × 10−4  3 × 10−4  The structure without a TMD 2.11 × 10−4  3.16 × 10−4 .

Under the same external load, the maximum shear stress in the interphase is much smaller in the latter than that in the former.

MFC internal resistance was estimated using both maximum power transfer theorem (varying the external load by a resistance box ranging from 0 Ω, that is, the short circuit condition, up to 4 kΩ. The internal resistance value coincides with the value of the external resistance that maximizes load power consumption) and drawing typical polarization curves (by using the VSP instrument).

The maximum device output power and maximum thermal efficiency occur at different values of external load parameter.

Two mating wedges were inserted into the hole of the specimen while the external load was kept at its maximum in a loading cycle.

It has been observed that cross sectional area and external load has significantly affected the maximum generated force and settling time respectively.