Your English writing platform
Discover LudwigSuggestions(1)
Exact(2)
Very satisfactory correlations are obtained for all examples with maximum errors less thank 5percentt in all results.
(1) Due to the better model accuracy and robustness, the Thevenin model is preferred for UC cell modeling with the maximum errors less than 8 mV.
Similar(58)
The numerical results agree well with those of experiments, with the maximum error less than 10%.
Compared with the results of FEM, the maximum error, less than 1%, demonstrates that the accuracy of the OM is high enough.
Based on the examination, the calculation speed of the simplified model is comparable with that of a one-dimensional model with a maximum error less than 0.54 K.
An empirical formula is presented based on the physical model experiments, with the maximum error less than 1% except at one point where the error is 1.6%, as compared to the experimental data.
Moreover, this discussion shows that the proposed equation by the authors for theoretical discharge in subcritical flow regime is not accurate (the errors increase up to 50%), thus it is derived an accurate equation (with maximum error less than 0.6%) for prediction of theoretical discharge in trapezoidal channels with a single measurement of end flow depth.
Figure 3 shows that Q r has an maximum error less than 0.3%, the maximum error of Q p is less than 2%, while Q l may result in an error up to 4.5%.
The experimental results show that the maximum errors are less than 2 and 5 μm under 0.1- and 0.5-Hz sinusoidal tracking control, respectively.
For three types of springs with different boundary conditions, designs are found with characteristic shapes and maximum force errors less than 1%.
After training, it was found that the maximum error was less than 3%, the average error was less than 1.2% and the R2 values were about 0.9999.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com