Sentence examples for maximum errors for from inspiring English sources

The maximum errors for the absolute values of Mueller matrix elements are reduced to 0.01 after calibration.

More importantly, the table shows large range of error between minimum and maximum errors for all correlations.

The maximum errors for simulated motion was  mm and for,  mm and for, and  mm and for.

The maximum error for each method which is the maximum difference between the actual measured boiler temperature profile and the estimated boiler temperature profile is estimated.

Case studies have been performed and the results have validated that the presented method is able to minimize the number of layers for constructing an LM part while controlling the maximum error for tolerance conformance.

It was found that for a certain load length, the load resistance at the frequency points of one-quarter wavelength of odd multiples results in peaks and in the maximum error for source impedance identification.

In this study, an effective and accurate method, having only 2 steps in measuring process and 1.5%p maximum error, for determining the fiber volume fractions of two different PAN (Polyacylonitrile -based carbon fiber reinforced comPolyacylonitrile -basedimetricarbonysis was developed and subsequently verifiberusing the reinforcedom 80 micompositesimages.

Therefore, the actual maximum error for this correlation is 104.3206%%.

The maximum error for average heat transfer coefficient was estimated to ± 2.3%.

Table 5 illustrates the maximum error for this case when (tau=1/64).

For both cable tension and bending moment the maximum error for cross-section area above 0.05 m2 is below 3.5%.