Sentence examples for maximum emission density from inspiring English sources
The maximum emission density of sample A is 3.9 mA/cm2, which is higher than that of sample B (3.28 mandm2) and C (2.97 mA/cm2.97
The Vickers hardness was 22.3 GPa, the flexural strength was 271.2 MPa and the maximum emission current density was 56.81 A cm−2 at a cathode temperature of 1600 °C.
The CNF array gives the turn-on electric field of 0.9 V/μm, the maximum emission current density of 6.3 matcm2 at 2 V/μm, and the field enhancement factor of 2585.
Conical shaped emitters and nanotube structures with nano-defects are produced that exhibit remarkable field emission with ultra-low turn-on electric field (∼0.16 V/μm) and a >300-fold increase in the maximum emission current density compared to non-irradiated nanotubes.
The optimal FE performance obtained from the GNF CNT composites shows a low threshold field of 1.54 V/μm and an extremely large maximum emission current density of 75.46 mA/cm2, far better than 1.77 V/μm and 27.90 mA/cm2 for the pristine CNTs, respectively.
The turn-on field, threshold field and maximum emission current densities for both MoS2 and CdMoS4 are strongly influenced by thermal annealing in inert atmosphere.
The a-C N films showed better cha-C Neristics, that is, lower threshold films showedths and higher maximum emission current densities, than the a-C films.
The maximum emission was 425 nm.
The maximum emission wavelength of luminol was about 420 nm.
The maximum emission wavelength of the device was 496 nm.
