Sentence examples for maximum electrode spacing from inspiring English sources

The Schlumberger configuration was used with a maximum electrode spacing of 2,000 m.

At Abgila (Fig. 1d), VES was conducted with the maximum current electrode spacing (AB) of 1,800 m with the intention of estimating basement depth, but even with the mentioned maximum current electrode separation the apparent resistivity curve did not show any rising trend for larger electrode spacing and therefore any signature of massive bedrock (Fig. 7).

The field measurements were made with a minimum and maximum current electrode spacing (AB) of 400 and 1,000 m, respectively.

These values were chosen to enable optimal mapping of both shallow and deeply seated structures (>100 m), assuming that penetration is about 1/6 of maximum current electrode spacing.

The VES was conducted with a maximum half-current electrode spacing (AB/2) 900 m.

VES-4 conducted at Abgila (VES-5) has maximum half-current electrode spacing (AB/2) of 900 m for estimating the basement depth at this particular survey point.

We used a 4point light hp 10w (Grinat et al. 2010) instrument with 27 electrodes on three chains with a 3 m electrode spacing and maximum depth penetration of 12 m.

The current electrode spacing ranges from a minimum of 2 m to a maximum of 800 m, while the potential electrode spacing varies between 0.25 and 20 m.

The maximum power density of 6.12 mW m−2 and coulombic efficiency of 8.6% were achieved at electrode spacing of anode 1 (and and cathode (15 cm).

Furthermore, Device 3 creates larger electric field gradients at low frequencies compared with Device 2. This is due to the increased capacitance of the very large electrodes for Device 3. The maximum gradient reached with Device 3 is less than that of Device 2; however, this is due to the increased electrode spacing.

The electrode spacing is 4 cm.