Sentence examples for maximum elastic deformation from inspiring English sources
Experimental results on the linear trajectory demonstrate that the proposed algorithm could reduce the maximum elastic deformation error from 23.4 μm to 6.4 μm and the root mean square (RMS) error from 19.5 μm to 3.1 μm which correspond to 84.1% and 72.6% reduction, respectively.
Also there is decrease in maximum pressure when elastic deformation in the bearing is considered.
The spring stiffness of a three-turn CNS is calculated to be 0.36 N/m with a maximum of 38% elongation for its elastic deformation.
Finally, results of a simple experiment are presented to verify whether or not the calculated maximum impact velocity which caused the elastic deformation in the contact region is acceptable.
Furthermore, the maximum impact velocity the cause of the elastic deformation in the contact region is obtained through a trial and error process.
The stress distribution beneath a spherical indenter was obtained by a previous simulation, which shows that the maximum hydrostatic stress occurs at the surface while the maximum shear stress occurs beneath the surface during initial elastic deformation in nanoindentation with a spherical indenter [14].
Stress concentrates around the two round holes of the sub body, and the maximum deformation amount is still at the stage of elastic deformation.
It is known that high temperature annealing and elastic deformation affects on the intensity, position of peaks maxima, and shape of the DRL spectrum [5].
For Au and Ag electrodes elastic deformation has little effect on the total electrode charge near the maximum of the st vs. E curves.
It's evidenced that β-Zr precipitates yield firstly and the plastic deformation with a significant work hardening follows as the stress exceeds the maximum elastic stress.
The simulation results show that the unloaded graphene film could make a complete recovery if the maximum indentation depth is less than the critical indentation depth, and the graphene film undergoes elastic deformation during the whole loading-unloading-reloading process.
