Sentence examples for maximum ductility that from inspiring English sources

In addition, the maximum ductility that can be achieved by rectangular hollow bracing members is examined.

The authors found an unexpected new type of failure (corner break off) that takes place for a certain interval of reinforcement ratio and that does not allow the beams to reach the maximum strength and ductility that would be expected if this type of failure did not exist.

Test results indicate that three BRBs with sufficient flexural rigidity of the restraining member develop (1) stable hysteretic responses up to core axial strains of 2.1%2.6%%, (2) maximum compressive loads of 1724 1951 kN (1.4 1.6 times the actual yield load), and (3) a cumulative plastic ductility that is much higher than that specified in AISC seismic provisions (2005).

In this figure, the red line is the demand global ductility that is obtained from NTHA at the target displacement corresponding to selected inter-story ductility.

However, it is interesting to note that the maximum ductility demand remains relatively constant for all skew angles.

They reported that the maximum initial stiffness was related to the X-braced frame specimen, while the maximum ductility was provided by steel plate shear wall.

Open image in new window Figure 6 Maximum ductility factor.

Considering these two extreme cases, simultaneous maximum ductility and energy dissipation response cannot be expected.

The maximum storey drift ratio and maximum ductility factor on the first storey reached 1/40 and 2.5, respectively.

The elastoplastic adhesive joints provide system ductility that compensates for the material ductility that FRP composites lack.

The coating heat-treated at 500 °C displayed maximum ductility (1.4%) and strength (60 MPa) with minimum porosity level of 1.9%.