Sentence examples for maximum displacement using from inspiring English sources

In the 300.0 °C environment, the actuator generated 1.67 mm maximum displacement using 2700 J of input power.

Global ductility (μ g ) is the ratio of maximum roof displacement used in NSPs (the target displacement) or peak roof displacement resulted by NTHA to the roofs yield displacement.

We re-classified ZMC fracture displacement using the maximum projection coordinate of the zygoma as the classification criterion and assessed whether a specific approach for particular displacement of a ZMC fracture would enhance the esthetic results.

The numerical results were compared with the maximum displacements obtained using the simplified approach suggested by the Eurocode 4. This formulation which, in the case of continuous beams, accounts for the nonlinear behavior of the component materials, was found to be often non-conservative.

It is also noticed that the maximum displacement occurs while using J2 plasticity model.

Face wrinkling and core debonding have been investigated under three point bending and the maximum displacement was studied using analytical and experimental methods.

Assuming an acceptable value for yield displacement, the designer converts the maximum displacement to the demand displacement ductility, and using a series of displacement response spectrums with different damping values (due to ductility values), calculates the effective period of the single degree of freedom structure in the maximum displacement.

Moreover, the online analyses were done for confirmation of the calculation method of the displacement that was used with only the maximum displacement.

The (x, y) coordinates of each object's center in each frame are used to calculate the maximum displacement of every object in the clip.

Then, the same problem in Figure 3 is solved using the minimization of the maximum displacement.

In many practical cases, a commonly used design criterion is the maximum displacement of the structure which does not exceed a specified value (stiffness criterion).