Sentence examples for maximum discharge time from inspiring English sources

If the maximum discharge time is sufficiently large, the optimized design presents fins that are disconnected from the internal tube.

Anodization of Ti foil for 97.78 min using voltage of 39.11 V and 0.42 wt% ammonium fluoride concentration will obtain maximum discharge time of 43.69 s and specific capacitance of 145.6 uF cm− 2.

In addition, as the percentage of electrode compression increases, the discharge time and maximum power of the VRFB cells gradually increase due to the increased electron transfer.

Generally, the analysis of the scour process is conducted under steady flow conditions, assuming that the maximum discharge is occurring for sufficient time to reach the equilibrium scour configuration.

During times of maximum discharge, the channel is completely inundated and most of the bars conduct water.

The specific capacity was calculated by the formula: C = 2I ⋅ t d /[(U m  − ΔU) ⋅ m], where I is a charge/discharge current, td is the discharge time, Um is the maximum voltage, ΔU is the voltage drop at the closure of the discharge circle, and m is weight of the NCM.

Based on the maximum power of 1.08 mW (293.33 mW/m) and the stable discharge time of 24 hours, 2.592 × 10-5 kWh of electric power can be extracted from a COD concentration of 400 mg/L.

In consequence, when the maximum discharge rate is 37 kPa/s during discharge hydrogen, the measurement error is less than 3% in whole discharge time.

The cycling stability of the compound was estimated from the discharge capacity value after stabilization (C s) by the maximum discharge capacity value (C max) according to the following equation [9]: S_{text{s}} = frac{{100 times C_{text{s}} }}{{C_{hbox{max} } }}.

We investigated the depth discharge relationship at HWC and found a moderate relationship between depth and drip discharge lag (response) times to soil moisture content, but only weak relationships between depth and mean and maximum discharge.

The average discharge of the Gharehso River is 7.9 m3/s, with a maximum discharge of 15.6 m3/s (Ardabil Regional Water Authority (ARWA) 2014).