Sentence examples for maximum discharge current from inspiring English sources
Figure8 shows the maximum discharge current as a function of input power.
At 90% SOC, in Fig. 15, the maximum discharge current of the heated battery pack is near 210 A (6C).
At the 10% SOC, in Fig. 16, the maximum discharge current of the heated battery pack is near 280 A (8C).
The sample C31 has the smallest capacity decline because the specific capacity at the discharge current 10 mA was 178 F/g and the change in capacity with the increasing current up to 100 mA does not exceed 18%. Figure 6b also shows that for samples C31, C33, and C34, the voltage drop at maximum discharge current 100 mA does not exceed 14%.
The pulses had the minimum discharge current of 17.5 A and maximum discharge current of 280 A and minimum charge current of 17.5 A and maximum charge current of 210 A. This pulse profile was designed to discharge the battery pack as quickly as possible.
Maximum instant discharge current in the active part of modulation cycle was 20 A.
It is found that the optimum gap distance between the anode and the cathode is equal to 3.5 mm, where stable discharge current and maximum output ion beam current can be obtained.
Maximum charge and discharge currents were, respectively, 3.4 and 4.2 A g−1 based on LiCo1/2Ni1/2O2 weight.
The particles showed a maximum discharge capacity of 222.9 mAh g−1 at a discharge current density of 60 mA g−1 and a high value of 109.1 mAh g−1 after 50 charge discharge cycles.
Low average discharge current was used with maximum value about 1 A.
The LiV3O8 obtained at 300 °C displays a maximum discharge capacity of 338.9 mAh g−1 at current density of 25 mA g−1 and after 20 cycles, a discharge capacity with 330.5 mAh g−1 is obtained.
