Sentence examples for maximum discharge burnup from inspiring English sources

These indicate that the maximum discharge burnup is primarily determined by imposed design constraints.

The maximum discharge burnup achievable under the peak fast fluence limit has been found to be ∼28% for the LBE system, and ∼30% for the sodium system.

Four types of the limiting fuel rods, individually with the Maximum Cladding Surface Temperature (MCST), Maximum Power Peak (MPP), Maximum Discharge Burnup (MDB) and Different Coolant Flow Pattern (DCFP), are chosen to cover all the fuel rods in the core.

On the other hand, the maximum discharge burnup value and core lifetime were quite similar to the results for the reactor that did not use BP particles at the initial condition.

Three types of the limiting fuel rods, with the maximum cladding surface temperature (MCST), maximum power peak (MPP) and maximum discharge burnup (MDB), are chosen to cover all the fuel rods in the core.

TRANSURANUS yielded the maximum rod discharge burnups of the several design combinations, under the condition that specific thermal-mechanical fuel rod constraints were not violated.

The results show that the OTTO scheme using the new fuel pebbles can achieve the maximum average discharged burnup of about 75 GWd/t, at which the core neutronic characteristics are comparable with that of the reference multi-pass scheme.

For a given discharge burnup it tends to somewhat increase with the equilibrium core power density.

Two types of discharge burnup are considered: 33 GWd/tHM and 50 GWd/tHM.

The results also show that the discharge burnup is proportional to the peak fast fluence.

Compared with the burnup calculations results of multipass fueling scheme, OTTO fueling scheme burnup performance is slightly inferior in that slightly higher enrichment and fissile loading per pebble are required to achieved the same average discharge burnup.