Sentence examples for maximum differential from inspiring English sources

"The maximum differential in outperformance generally occurs during the two years after the government sale," he said, "because management makes the biggest changes first".

The maximum differential nonlinearity (DNL) is +0.6167/−0.3151 LSB and the maximum integral nonlinearity (INL) is +0.4271/−0.4712 LSB.

For any failure analysis of materials, whether ductile or brittle, the principal stresses are required since they represent the maximum and minimum stresses, or the maximum differential stress values.

Finite element method (FEM) was employed to investigate the relationship between four factors and the maximum differential of the horizontal side force (Fm) on a force transducer in the measurement of different orientations.

Maximum differential optical density of the ECW increases with the covering percentage of the carbon dots up to a point and levels off for further increase in the covering percentage.

The results indicate that molecular ions have roughly the same energy distribution as the O+ ions, with maximum differential flux occurring below 400 eV, but are far less abundant, by two orders of magnitude.

Of note, the two CpG islands that were not significantly differentially methylated exhibited broad variability from the minimum to maximum differentials, which could potentially add information on a subset of samples to the classifier, particularly when considered in conjunction with other CpG islands.

Consequently, the main requirement to minimise the heat distribution costs implies the use of the smallest technically feasible pipe diameter which refers to the maximum allowable differential pressure without inadmissible cavitation pitting.

It was found that the maximum and differential settlements of the foundation beam can be reduced by increasing pile stiffness, reducing pile spacing, and increasing the elastic modulus of the beam.

Special attention was paid to the influence of several key factors on the performance of the embankments indicated by maximum and differential settlements, tension in the geosynthetic, and degree of consolidation.

The maximum allowable differential pressure for this type of filter is 1000 psi.