Sentence examples for maximum deviation with from inspiring English sources

The accuracy of the sensor output was 0.53% (2.60 g maximum deviation) and −0.33% (−1.26 g maximum deviation), with precision error of 0.63% (3.21 g) in the output span.

When q = 1, then an equal importance or weight is given to each deviation and when q = 2, then each deviation is weighted proportionately with the maximum deviation with the maximum importance or weight (Lai et al. 1994).

The maximum deviations with AP and ML dynamic rotation were larger than those with RD and LD dynamic rotation (AP dynamic rotation: 60.4%±15.6%; RD dynamic rotation: 35.6%±9.9%; ML dynamic rotation: 58.6%±13.5%; LD dynamic rotation: 14.9%±6.0%) (P<0.05).

Meanwhile, the traditional Kern correlation, with a 7.1% maximum deviation compared with the test data, is still appropriate to analyze the HTPs of molten salt STHE-SBs.

According to Dutch Nuclear Medicine Guidelines, dose calibrators should be validated for all radionuclides and geometries with a maximum deviation of 5% with respect to the true radioactivity.

The results show that for specular reflectors of perfect alignment, to collect the entire reflected solar beam, the amplitude of the sinusoidal centreline of the new absorber must not be larger than a maximum deviation, Δmax, established with reference to the focal line.

The numerical model was verified by comparing the predicated results with those obtained from the available analytical and experimental data with maximum deviation of 10%.

A WDM equalizer with dispersion 2003 ps/nm over an operational frequency range of 10 GHz was designed with maximum deviation of the group delay of 3.86 ps.

Finally, the new correlations were proposed for predicting the Nusselt number and friction factor of the nanofluids with maximum deviation of 10%and3%3% respectively.

In addition, the reluctivities are assumed to be uncertain (5) with maximum deviation of 10%2 for the respective nominal value.

The proposed methodology can lead to filament heaters capable of satisfying the two conditions on the design surface with maximum deviation of about 2% and average deviation less than 0.5%.