Sentence examples for maximum deviation for from inspiring English sources

Therefore, nonlinear correlations have been proposed with 3% maximum deviation for the estimation of thermal conductivity and viscosity of nanofluids.

The maximum deviation for the Nusselt number and friction factor between the simulation and the published data were 8.81% and 13.1% respectively when the Reynolds number ranged from 1500 to 10,000.

The maximum deviation for functionalized nanofluid is 6.8%.

A deviation of 5% in the parameters of the random model causes a maximum of 22.89% deviation for (B t)), 16.06% maximum deviation for (R t)), 6.19% maximum deviation for (S t)) and 4.88% maximum deviation for (A t)).

From Fig. 6 it can be seen that for STC specimen these parameters also depend on distributed-load width and the a c /D ratio shows maximum deviation for STC specimen with β = 0.15 from those obtained for TPBT for a given specimen size.

From Fig. 7 it can be observed that for STC specimen the value of CTODc depends on distributed-load width and the value of CTODc shows maximum deviation for STC specimen having β = 0 from those obtained for TPBT for a given specimen size.

Wilke relation gives maximum deviations for all the systems in comparison to other methods employed.

The mean relative errors and maximum deviations for the observed single solute concentrations are given in Table 1.

Figure 5 shows that δ p values remain stable – with maximum deviation of 2nm – for the four optical-depth locations as the sample-section thickness changes from 4.5 µm to 5.5 µm.

For longer acenes, the CS GW gaps increasingly deviate from the experimental gaps with a maximum deviation of 0.5 eV for decacene.

In 50 groups of random tests, compared with FEA results, the calculated capacitance values have a maximum deviation of 1.486% for rectangular membranes.