Sentence examples for maximum current to from inspiring English sources

In case of a shortcut, these resistive networks limited the maximum current to some extent.

The MPPT charge controller ensures that the loads receive maximum current to be used (by quickly charging the battery) and the maximum power point could be understood as an ideal voltage at which the maximum power is delivered to the loads, with minimum losses.

In case of an embedded mechatronic system requiring multiple regulated outputs, with independent regulations to avoid single-point of failure according to automotive standards [3], an array of the same DC/DC converter hardware macrocell can be realized by proper scaling the integrated power FET area of each channel according to the maximum current to sustain.

The transient current is shown to pass through a single maximum prior to the approach of the steady-state value, with the ratio of the maximum current to the steady-state value being 1.285 and 1.332 for so-called "instantaneous" and "progressive" nucleation, respectively.

As no major differences were found we restricted the maximum current to 100 µA for the latter experiments.

From the statistical data in Fig. 6b, 0.6 V was selected by the fact that NiO HPA electrode exhibits maximum current response to glucose and minimum interference to AA at 0.6 V. Figure 6c displays the typical amperometric responses of NiO HPA and NiO BHPA towards different concentration of glucose at 0.6 V.

It was also shown that the maximum current density to the activated inert electrode was equal to the limiting diffusion one to the massive active electrode, as well as that the activity of the modified inert electrode at the same coverage of catalyst strongly depends on the exchange current density of the electrochemical process taking place on it.

Three reference voltages are generated from the current reference circuit for biasing the bottom gates of CNTFETs that produce maximum current due to the electro potential changes in the top gate.

In contrast, at human 5-HT3AB recepthes, the maximum current response to mCPBG is 2.6-fold greater than that for 5-HT.

Select a 14 AWG conductor for a maximum current up to 15 amps.

Residual strength of composite laminate is generally greater than 80% and decreases with the increasing peak current or ratio of time to the maximum current and that to 50% of the maximum current under static tensile load.