Sentence examples for maximum crack width from inspiring English sources
In addition, the maximum crack width and the ultimate bearing capacity were measured.
The serviceability criteria for design of GFRP reinforced beams appear to be governed by maximum crack width.
A mass loss of steel of 1% corresponded to a maximum crack width between 0.14 and 0.22 mm.
The test results also indicate that the maximum crack width at a certain drop stage decreased with the reinforcement ratio.
The capacity of the material will be investigated to completely or partially re-seal the cracks, as a function of its composition, maximum crack width and exposure conditions.
This paper discusses the calibration of reliability index of RC beams in buildings for serviceability limit state of maximum crack width.
Besides the presentation of the methodology of determining statistical properties of crack widths, it is shown that mean and maximum crack widths might be underestimated by analytical models as recommended in current design codes.
It was found that at maximum crack widths below 0.6 mm, the majority of beams exhibited nearly similar crack patterns as well as rate of widening of corrosion cracks.
Also, the maximum crack widths for the constant current specimens were greater than those of the constant voltage specimens.
The represented shear crack widths for a given beam were the maximum crack widths recorded along the most dominating shear crack in a beam during the test.
