Sentence examples for maximum crack size from inspiring English sources

For example, decreasing the maximum crack size by 4.4% and increasing the lowest fracture threshold by 2.8% results in the reduction of probability of failure by 40%.

The parametric studies show that reducing the maximum crack size (by limiting inspection threshold) and increasing the fatigue threshold (by improving fracture toughness of a material) are the most effective ways of reducing the probability of failure.

The maximum crack size corresponds to the case where the elastic strain energy released upon crack growth is no longer sufficient to compensate for energy expended in extending the crack as the crack is growing into the rapidly decreasing stress field.

We use this information to determine the minimum crack size for crack growth to occur and the maximum size to which cracks may grow.

The maximum error in predicting the crack size is less than 12% and 30% respectively for the two cases.

It was concluded that fatigue damage accumulated in a stainless steel component can be estimated from an identified crack size, or the maximum CUF can be determined even if no crack was detected by the inspection.

A margin of 2 on crack size was chosen in establishing maximum allowable crack sizes.

Instead of estimating the largest crack size with the distribution of maxima, prediction of the shortest expectable initiation time is obtained using the distribution of minima.

Maximum crack lengths are 30 μm, which is considerably below grain size.

The crack length estimated during the non-destructive inspection is affected by sizing errors, i.e. the measured crack size is different from its true size.

b Maximum crack widths.