Sentence examples for maximum corrosion resistance from inspiring English sources

For maximum corrosion resistance, the company builds its doors, hoods and decklids of galvanized steel.

The maximum corrosion resistance was obtained for coatings with equal to 15 nm, corresponding to bilayer n = 80.

Therefore, DLC films at lower concentration of NCD particles had the maximum corrosion resistance.

These models, represented as contour diagrams, show that an oxide coating with a Ra value of 1.5 μm exhibited the maximum corrosion resistance.

In this study, a Taguchi design of experiment method was used to optimize the process parameters for the polypyrrole coating so as to produce the maximum corrosion resistance.

As a result, the maximum corrosion resistance was achieved in a furnace post-aging process due to the formation of an oxide layer on the surface.

However, a maximum value of corrosion resistance as a function of the depositing parameters is observed, indicating that the optimal electrodepositing parameters and operating conditions are essential to the maximization of the corrosion resistance of the coated steel in oil sand slurry.

The substrates coated with Ti/TiN multilayer coatings exhibited better corrosion resistance (maximum 87% protection efficiency for M3) and higher hardness value (maximum 34.1 GPa for M1) than those coated with TiN single layer.

The nitriding conditions that resulted in the maximum wear resistance also provided significantly increased corrosion resistance.

Because of the good corrosion resistance of the FRP, the maximum crack width limits can be slightly larger than that of the RC slabs.

Also, alloys have been developed that combine good formability and corrosion resistance with the ability to achieve maximum strength without heat treating; these alloys develop their strength during the forming operation.