Sentence examples for maximum compressive force from inspiring English sources

For the compressive flattening, the maximum compressive force, displacement and strain are 98N, 60mm and 0.29%, respectively.

The push-in and pull-out performance of auxetic and non-auxetic nails is compared by using two key parameters of the maximum compressive force and the maximum tensile force.

The amount of maximum compressive force extracted from FE model.

The values indicate the maximum compressive force divided by the nominal tensile strength of strands.

Compressive forces generated during incremental fixator foot ring displacement to 20 mm and incremental screw tightening were measured using a custom-fabricated instrumented miniature external fixator spanning the transverse tarsal joint.The maximum compressive force generated by the external fixator averaged 186% of that produced by the screws (range, 104%-391%).

At the maximum compressive force (≈40 nN), aggrecan macromolecules on the tip were also at ≈50% molecular strain.

Research and design guidelines suggest the use of two different approaches to quantify the required interfacial shear strength, namely based on the maximum compressive forces in the flange at mid span or the maximum shear flow at the supports.

Our predicted values were highly similar to the measured values with the predicted first and second maximum compressive forces within 7% and 3% of the observed values, respectively.

This w/c ratio resulted in the maximum compressive strength.

A torsion force was added manually at ∼40% maximum compressive loading force during the pinch test.

The needles will not break if the applied load is below the maximum compressive or bending force.