Sentence examples for maximum coating temperature from inspiring English sources
The thermal cycling properties of several modified thick thermal barrier coatings (TTBC) were studied in three test series in which the maximum coating temperature was fixed to 1000, 1150 and 1300 °C.
A maximum coating temperature of less than 800 °C is observed.
The maximum coating hardness was obtained at high spark energies.
The coating's maximum degradation temperature rate Tp is up to 410 °C, which is higher than that of commercial coating (86 °C).
For the standard TiAlN-coating, the maximum operating temperature conditions is therefore limited to 850 °C.
Fig. 2 Surface temperature and maximum copper temperature for different total coating thicknesses.
It was shown that the maximum surface temperature of the functional graded coating AlSi alloy and steel pistons was increased by 28% and 17%, respectively.
If we assume a maximum service temperature of 1150 ∘C for the top coat, a coating thickness of 90 μm can be chosen.
The temperature history was measured on both sides of the specimens and a maximum surface temperature of 1170 °C on the coating surface and a thermal gradient of 500 °C was obtained across the TBC system.
Under normal operation, the layer of silicon carbide coating had a less significant impact on the maximum fuel temperature, and the temperature remained lower than the maximum acceptable fuel temperature of 1495 °C for normal operation even when a thick layer of silicon carbide was applied.
The reason for this is the transient maximum in the temperature difference between coating and substrate shown in Fig. 4.
