Sentence examples for maximum brightness and from inspiring English sources

These plasma lights can be dimmed down to 20% of their maximum brightness and can give off up to 130 lumens per watt.

A triple-layer device based on this blend exhibited higher maximum brightness and luminance efficiencies relative to those of the pure polyfluorene.

Our all-inorganic full-colour QLEDs show the maximum brightness and efficiency values of 21,600 cd/m2 and 6.52%, respectively, which are record-breaking among the existing all-inorganic QLEDs.

It also discusses in a more general way the techniques used at LBNL for finding optimum lattices (e.g. the ones with maximum brightness) and optimizing the particle dynamics, thereby increasing beam lifetime and stability.

The maximum brightness and current efficiency of EL device from P05 (5230 cd/m2, 0.65 cd/A) are significantly enhanced when compared with those from poly 9,9-dihexylfluorene) (poly 9,9-dihexylfluorene/A).

In the device D, the maximum brightness and efficiency of 1 are 8512 cd m−2 at 13 V and 3.10 cd A−1, and they are 9818 cd m−2 at 13 V and 0.42 cd A−1, for 2. Our results also show that both 1 and 2 are good bipolar and bifunctional molecules with high hole-transporting and luminance properties.

A multilayer organic light-emitting diode (OLED) with (MBI Pt acac) as phosphorescent dopant was fabricated using the method of high-vacuum thermal evaporation, which gives a maximum brightness, luminous and power efficiency of 13 605 cd/m2, 15.1 cd/A and 4.3 lm/W, respectively.

Finally, high performance blue-green and green EL devices with maximum current efficiencies of 35.22 and 90.68 cd/A, maximum power efficiencies of 26.36 and 98.18 lm/W, and maximum brightness of 56,678 and 112,352 cd/m2, respectively, were obtained by optimizing the doping concentrations.

The maximum brightness (13,640 cd/m2) and current efficiency (0.69 cd/A) were superior to those without HTL (ITO/PEDOT PSS/MEH-PPV/Ca/Al: 7810 cd/m2, 0.28 cd/A).

In the device C, the maximum brightness of 1 and 2 are 8729 and 5838 cd m−2 at 10 V, respectively, with an efficiency of 1.99 and 1.71 cd A−1.

Electroluminescent devices using 4a and 4b as doped emission layer show promising device performance with low turn-on voltage (3.0 V), maximum brightness around 15100 cd/m2 and 16100 cd/maximumimum luminance efficiency of 12.4 cd/A and 13.6 cd/A and maximum external quantum efficiency of 5.34% and 5.63%, respectively.