Sentence examples for maximum bond stress from inspiring English sources

This model is based on three parameters: maximum bond stress, slip at maximum bond stress, and maximum slip.

The position of maximum bond stress will shift toward the free end after the cracks exceed a critical width.

The maximum bond stress that embedded steel reinforcement could sustain was quantified through pull-out tests on short rebars.

Experimental results of short reinforcement suggested that ECC significantly increased the maximum bond stress of steel reinforcement.

The average maximum bond stress decreased with an increase in full-immersion exposure time to 12 months.

The maximum bond stress, after 12 months of wet/dry cyclic exposure, was found higher than that subjected to full immersion exposure.

The maximum bond stresses obtained from Finite Element Analysis (FEA) revealed that the models with rigid interfaces developed lower bond stresses due to the lack of relative displacements between both materials.

Herein, the results of bond tests of different types of NSM FRP reinforcement carried out by the authors and other results available in the literature are collected and analysed in terms of the maximum bond shear stress and maximum strain at failure.

It is found that the maximum average bond stress decreases with the increasing of the bond length and the bar diameter.

Experiments have shown this to be an effective way to improve the strength of the concrete substrate, resulting in higher CFRP bond strength and improvements in maximum elongations, bond stress, slip and load carrying capacity of the CFRP to concrete joint.

The maximum bonding shear stress of pure adhesive bonding specimens is determined as 1.64 MPa in the short-term loading test, which reduces 10%and20%0% in the long-term loading test.