Sentence examples for maximum bending and from inspiring English sources

Let (sigma _s) and (tau _s) denote the maximum bending and the maximum torsional stresses, respectively.

The simple asymptotic formulas describing load deflection diagrams, maximum bending and membrane stresses of the structure are derived.

It is shown that the maximum bending and the maximum impact force follow linear evolution with respect to the drop height.

When stems bend in the wind, the maximum bending and axial stress occurs at the outer surface, close to the cambium, in the lower part of the stem (Mergen, 1954; Petty & Worrell, 1981; Morgan & Cannell, 1994; Chiba, 2000).

As a result, the ZnO nanorods/carbon fabric/resin composite (sample CP3) possesses the maximum bending and tensile strength of 62.7 MPa and 170.0 MPa, which increases by 40.2% and 59.1% compared with that of bare carbon fabric/resin composite due to the best mechanical interlocking and chemical adhesion at the interfacial region of the composite.

For comparison of the fixation strength, the differences in maximum bending and torsional loads between the two groups were also compared with the paired t-test.

As shown in Fig. 3a, the maximum bending moment and warping moment (in magnitude) were located at support and mid-span; and the bending moment and warping moment at support, and those at mid-span are equal in magnitude while opposite in direction, respectively.

On the basis of the resistance measurement, it was demonstrated that the electromagnetic field generated by a mobile phone (Nokia 5110, 900 MHz) does not significantly affect the mechanical properties of the studied long bones regarding plastic deformations and it only increases the energy at maximum bending force and decreases stress in the proximal tibial epiphysis at maximum bending force.

We defined two trajectory ratios: (1) The area ratio was defined as the quotient between the partial area under the curve in the first portion of the movement, up to the point of maximum bending κ, and the total area enclosed between the curve and the line.

Spinal ranges of motion (ROM) were measured from neutral standing position to maximum bending position and from neutral standing position to maximum extension position before and after the experimental period, using a SpinalMouse® device (Idiag, Volkerswill, Switzerland).

Formulas including maximum bending moment and membrane force effects were illustrated by applying Levy's method and superposition method.