Sentence examples for maximum beam current from inspiring English sources

A maximum beam current density of 3.5 A/cm2 was achieved.

The deuteron driver accelerator should accelerate the deuteron beam up to 40 MeV with maximum beam current of 10 mA.

The observed He− beam current after mass analysis was routinely 20 μA with a maximum beam current of 32 μA.

The accelerator is capable of accelerating protons or deuterons up to 4 MeV with a maximum beam current between 200 and 300 μA.

A compact interaction region (IR), which is the most complicated region in the BEPCII, has been designed to afford a peak luminosity of 1×1033 cm−2 s−1 with an equal beam energy of 1.89 GeV, a cross angle of ±11 mrad, 93 bunches and maximum beam current of 0.91 A.

For 11.6 MeV proton beams, the yields were about 14 16 MBq/μAh with maximum beam currents of 30 μA in 3 3.5 h irradiation time.

Some TE X-ray tubes are fitted with two filaments, allowing a choice of focal spot sizes, though this is at the expense of maximum available beam current and hence photon output.

The burnup analysis was performed for the ADS core with SAR and the results indicated that the maximum proton beam current during the burnup cycle was reduced from 20 to 13.5 mA.

The cryostat contains two TESLA cavities (1.3 GHz) and is designed for continuous-wave (CW) operation with an accelerating gradient of 10 MV/m and a maximum average beam current of 1 mA.

Contemporary light sources operate in a top-up mode to maintain their photon intensity quasi-constant so as to improve significantly the thermal stability of the photon beam and to maximize ultimately the average photon flux at a designed maximum operational beam current.

It is found that the maximum ion beam current is extracted at the optimum operating pressure at which the area of bias electrode exposed to ambient plasma is fully covered with the anode spot plasma whose size is dominantly determined by the operating pressure for given gas species.