Sentence examples for maximum average output from inspiring English sources

Also, the optimum tilt angle that gives maximum average output power depends on number of uncleaned days for the dusty panels.

The maximum average output power of 17.1 W (1.71 J at 10 Hz) and the beam size of far-field pattern with 1.5 times diffraction limit was obtained.

A maximum average output power of 520 W with 180 J maximum pulse energy has been achieved with a slope efficiency of 5.4% using a dual rod configuration, which is the highest for typical lamp pumped ceramic Nd YAG lasers.

The maximum average output power of 8.94 W with a 9.3 ps pulse width at a repetition rate of 111 MHz is obtained under a pump power of 24 W, correspondingly the optical slope efficiency is 39.2%.

For example, if FTE efficiency is 75% with a group size of 20 30 and 50% with a group size of 55 65, then the maximum average output is predicted to be around 0.88 preclinical candidates per year (Figure 11).

If parameters M and N are sufficiently large, i.e., FTE efficiency is sufficiently high, then under the simulation conditions the maximum average output could reach 1.2 preclinical candidates per year.

In this paper, the analytical error model was developed using the maximum relative representation error (MRRE) and average relative representation error (ARRE) to obtain the maximum and average output errors for the bit-width reduced FPUs.

The analytical error model, using the maximum relative representation error (MRRE) and the average relative representation error (ARRE), is developed to obtain the maximum and average output errors for the bit-width reduced FPUs.

Let the maximum and the average output power of the transmitter be denoted by P max and P out, respectively.

Using this geometry, a maximum linearly p-polarized average output power of 415 W and a pulse energy of 150 J was achieved with a slope efficiency of 4.3%, which is on higher side for typical lamp pumped long pulse Nd YAG lasers.

The OBO is defined as the maximum output power to the average output power ratio, given as OBO = 10 log 10 ( A 0 2 / E [ G ( x ) 2 ] ).