Sentence examples for maximum and ultimate from inspiring English sources

The hysteretic behavior of specimens which clarifies their nonlinear behavior, capacity curve, maximum and ultimate strength, ductility and ultimate displacement, absorption and dissipation energy, damping and deterioration of stiffness are studied in this investigation.

The maximum and ultimate resistance, ductility, degradation of loading and unloading stiffness, absorption and dissipation of energy and equivalent viscous damping were studied in this investigation and the effect of steel fibers on the cyclic behavior was compared with each other.

Generally, by increasing steel fiber maximum strength, maximum displacement and ultimate strength increase.

Drawing the composites to 200 % strain instigated the mechanical characteristics with a significant enhancement in both Young's modulus (maximum ~×4) and ultimate tensile strength (maximum ~×2).

Also in the positive range of loading, the value of maximum strength and ultimate displacement are presented in Table 3.

The maximum yield and ultimate tensile strength value recorded for laser sintered DuraForm 12® were found to be similar to injection-moulded PA 12.

Open image in new window Fig. 6 Comparison of capacity curves of specimens Table 3 Maximum strength and ultimate displacement of specimens vf.

Many GCMS derivatization reagents has been tried and tested in the past to get maximum sensitivity and ultimate recovery of diclofenac from human plasma.

Generally, the addition of steel fibers up to a certain limit value (vf = 2%) improves the cyclic behavior of reinforced concrete beams and results in the increase of maximum strength and ultimate displacement.

During tensile testing, a maximum yield and ultimate tensile strength of 182 MPa and 312 MPa were obtained for the forged samples, representing increases of 121% and 33%, respectively, from the as-cast condition.

According to Fig. 4, with increasing steel fibers in the concrete mix, maximum strength and ultimate displacement increase and the extension of damage and propagation of cracking in the total length of the specimen without steel fiber are larger than in specimens with steel fibers.