And the derivation of delay has the maximum and minimum value.
Results showed that the maximum and minimum value of buckling load occurred at levels 2 and 16 respectively.
Besides, I can get the amplitude of the waveform by calculating the difference between the maximum and minimum value in one period.
At 14 00 h, the mean reduced PET (△PETm) by UGS are around 2 °C with the maximum and minimum value being 15.6 °C and −8.4 °C, respectively.
At the same time, a weighted function of the differences between maximum and minimum value of AN spectrum curve is designed to obtain a proper threshold function.
It is shown that the actual American code is the most appropriate by imposing a maximum and minimum value for the reinforcement ratio.
The maximum and minimum value of tensile strength were 450.90 MPa and 158.16 MPa which occurred in design levels 1 and 14 respectively, also the maximum and minimum of izod impact strength were 10.47 kJ/m2 and 2.56 kJ/m2 which occurred in design levels 13 and 14 respectively.
The maximum and minimum values of first mode of damping occurred in run numbers 10 and 1 that were 3.74% and 1.71% respectively, also the maximum and minimum value of second mode of damping occurred in coded levels 6 and 1 with the values of 4.61% and 1.02% respectively.
For explicit and semi-implicit time discretizations, our statement reads as a constrained quadratic programming problem where the objective function is the Euclidean norm of the error in the reduced Galerkin (algebraic) formulation, while the constraints correspond to bounds for the maximum and minimum value of the coefficients of the N-term expansion.
Curves show maximum and minimum value of (v_{1}) or (v_{2}).
(iii) is computed as mean of the maximum and minimum value normalized by the global mean.
