Sentence examples for maximum and differential from inspiring English sources

Comparing to the uniformly granular pile arrangement, GPA1, the granular piles arrangement, GPA5, causes a decrease in the maximum and differential displacements by 12.7 and 80%, respectively.

For a uniformly loaded strip footing, the presence of granular layer helps to transfer stress from soil to granular piles and reduce maximum and differential settlements [3, 4].

A decrease in the (L_{gp} /H) ratio from 1.0 to 0.4 causes an increase in the maximum and differential displacements by 7.2 and 8.8%, respectively and subsequently an increase by about 7.6 and 9.9% in the maximum and differential displacements respectively as the (L_{gp} /H) ratio decreases from 0.4 to 0.2.

It was found that the maximum and differential settlements of the foundation beam can be reduced by increasing pile stiffness, reducing pile spacing, and increasing the elastic modulus of the beam.

Special attention was paid to the influence of several key factors on the performance of the embankments indicated by maximum and differential settlements, tension in the geosynthetic, and degree of consolidation.

A reduction in the maximum and differential displacements of the strip footing of about 83.8 and 73.6%, respectively, is found as the soil stiffness increases from 0.8 to 8 MPa (i.e., the modular ratio decreases from 50 to 5).

By using these new auxiliary functions, parabolic maximum principles, and differential inequality techniques, we complete the study of problem (1.1).

The MTF and NNPS data were obtained from output images and were compared with full-width at half-maximum (FWHM), sensitivity and differential uniformity.

Bad channels were interpolated when outlying (>2 SD above the median) the distribution with respect to amplitude, variance, and maximum differential (see Junghofer et al 2000), and a maximum of 25 channels was set for interpolation.

Additionally, resource assignment scheme, guard band size, maximum number of split-flow and differential delay constraint are also considered into MFVC and the performances of the proposed algorithm can be demonstrated to improve the spectral utilization and greatly decrease blocking probability through extensive simulations.

To follow the time course of the interaction, we used the ratio between the approximate maximum and minimum of the differential spectra (R  =  I455 nm/I525 nm), that correlates with the dipole potential variations.