Sentence examples for maximizing load from inspiring English sources

Communication network topology design needs to address several conflicting requirements, such as minimizing the overall network diameter, minimizing the infrastructure cost, minimizing management cost, maximizing load distribution and so on.

The EGIP is based on the interaction of two agents: a Disruptive Agent (DA) that aims at maximizing load shedding by performing attacks in the power system; and a System Operator (SO), who reacts to these attacks by modifying the generation dispatch in order to minimize load shedding.

However, femtocell locations are usually designed for purposes other than maximizing load sharing capabilities.

Two reconfiguration situations are considered: operation mode adjustment with the objective of minimizing active power loss (situation I) and service restoration with the objective of maximizing loads restored (situation II).

MFC internal resistance was estimated using both maximum power transfer theorem (varying the external load by a resistance box ranging from 0 Ω, that is, the short circuit condition, up to 4 kΩ. The internal resistance value coincides with the value of the external resistance that maximizes load power consumption) and drawing typical polarization curves (by using the VSP instrument).

Teller and Cashell (1959) conducted repeated load tests to determine the requirement of the length of dowel embedment for maximizing the load transfer efficiency.

The control objective is to manage the power flow from working power sources and battery to ensure survivability, namely, ensuring system safety and maximizing the load support.

This is important for DSOs, because minimizing variance is equivalent to maximizing the load factor and hence, minimizing the losses in the distribution network [27].

Furthermore, the optimization in maximizing pullout load and total pullout work is found to be more prominent for the 3D fibres with a larger diameter than for fibres with a smaller diameter.

The goal is to prioritize the 161 HUC-8 watersheds in this ecoregion so that available conservation dollars will be invested strategically while maximizing sediment load reduction.

The wood used was selected for microfibril orientation almost exactly parallel to the grain, maximizing the load carried elastically by the microfibrils and reducing time-dependent deformation during data collection to <10% of the total.