Sentence examples for maximize the contact from inspiring English sources

My idea was to use the bag's flexibility to maximize the contact of mix and ice.

In fact, the morphology of the catalyst was tailored to maximize the contact between the soot particles and the catalyst itself, at increasing degrees of soot catalyst contact.

In addition, the PMMA loops have an angulation of 10 degrees to maximize the contact area of the three-piece IOL with the posterior capsule after surgery, which is effective in preventing the development of posterior capsule opacity10,11.

The indenter load and geometry can be so chosen as to minimize or maximize the contact radius to seek the broadest range of applicability and validity of the proposed method by recourse to macro-, micro- and nanoindentation of elastoplastic materials.

Fuel and air reactors are two interconnected circulating fluidized beds reactors, with the coal being fed at the bottom of the fuel reactor to maximize the contact between the volatile matter and the oxygen carrier particles.

The permeator is based on a rectangular section multi-channel distribution where the liquid metal channels and vacuum channels are alternated in order to maximize the contact area and therefore to promote tritium transport from the bulk to the walls.

A simple geometrical model predicts the angle and extent of orientation based on maximizing the contact area between the myoblasts and patterned topographic surfaces.

It was observed that maximizing the contact surface area between the PCM and the absorber plate significantly enhances the outlet temperatures.

Also, effects of the residual stress and metal removal on the contact fatigue life have been estimated, and an equation is proposed to calculate the optimal metal removal depth for maximizing the contact fatigue life.

The improved performance originates from the fact that the 3D porous structure offers a "buffer zone" to accommodate the large volume change during cycling, and the foam-like substrate maximizes the contact area between electrode and electrolyte.

The tri-component electrode configuration in Figure 4b, with the outer electrode enfolding the fibre entirely, is believed to result in the maximum voltage output from the system because it maximizes the contact areas to the piezoelectric PVDF.