Sentence examples for maximize ablation rate from inspiring English sources

Ultra-short pulse laser processing of hard materials, such as cemented tungsten carbide, requires an accurate and agile experimental and analytical investigation to obtain adequate information and setting parameters to maximize ablation rate.

The ablation rate was defined as the ablated volume divided by consumed laser energy, and was used as a description of ablation cleaning ability.

The ablation rate and strength reduction in cyclic ablation were lower than those in single ablation.

The equivalent ablation rate is less than 0.5 nm/min.

An optimal ablation rate of 2.16 m²/h at an ablation depth of 1 5 mm was achieved.

Ablation behavior of the filled composites were investigated based on the linear ablation rate, mass ablation rate and back face temperature profiles.

The results showed that both linear ablation rate and mass ablation rate increased with increasing mass ratio of oxygen/ethanol.

The results show that the ablation rate of the composite is linearly proportional to the ablation time; a single step ablation shows a higher ablation rate as compared to the ablation carried out in steps, keeping the total ablation time the same.

This can be caused by a different ablation rate of crystalline and amorphous phase [19].

Typically, during the deposition, a target should be rotated to achieve a stable ablation rate.

The slight variation of thickness attributed to the difference in ablation rate of Ag and ZrO2.