Sentence examples for maximise when the from inspiring English sources

By combining Global Positioning System (GPS) registrations and radar wind measurements, Arras et al. (2009) have shown that ES occurrence frequencies actually maximise when the zonal wind shear provided by the SDT is negative.

They found that the dynamic range was maximised when the local branching ratio was equal to one.

Cyclic voltammetry indicates that the electrochemically active surface area of IrO2 RuO2 clusters is maximised when the composition is 75 mol% IrO2 25 mol% RuO2.

Efficiency is maximised when the required volume of muscle is minimised, which may also help reduce limb inertia and basal metabolic costs.

The operating profit is maximised when the process gas temperature profile along the reactor and the inlet steam to naphtha ratio vary within certain ranges.

The starting point is that for any given job, productivity is maximised when the worker possesses a level of skills that is required for that job, but neither more nor less.

This suggests that the suprathermal electron acceleration mechanism relies on pump power being directed along the striations which maximises when the pump beam is pointed along the magnetic field-aligned direction.

Data for the 3D structures show that the efficiency is maximised when the sphere radius is minimised, but it is further shown that practical issues limit the minimum radius that can be used for transient radiological contamination monitoring.

Since it is shown that the strain in the film is maximised when the film is in direct epitaxial contact with the substrate, and relaxed by the presence of Mn-rich APBs, it is clear what must be done to further improve the properties of these materials.

The 2D structures were evaluated relative to a single crystal scintillator and results show the detection efficiency of the 2D structures is maximised when the sphere radius is c.a. 0.46x the maximum track length of the beta particle in the scintillator.

According to the model, the production of total pyrolysis liquids (including those obtained by solvent extraction) was maximised when the following conditions were used: reaction temperature of 350 °C, reaction time of 30 min and initial pressure of 0.2 MPa, leading to liquid yield of 91.3% (w/w).