Sentence examples for maximal temperature at from inspiring English sources

The maximal temperature at collector top surface was 83 °C and power loss at the tube body did not exceed 10 kW, the interlock level for the protection of the klystron.

Via the comparison on the maximal temperature at combustion chamber's exit and the specific impulse, it can be obtained that the wall thickness plays an important role in the influences on the general performance of ADN-based thruster while the catalyst-bed's length has the weak effects on the general performance among the three structure parameters.

In Stage 2 of the study (cement leakage model), the average maximal temperature at the anterior cortex was 42.7 ± 2.4°C; at the neural foramen, 41.1 ± 0.4°C; at the posterior cortex, 59.1 ± 7.6°C and at the vertebral center, 77.3 ± 5.7°C.

In Stage 1 of the study (vertebroplasty of the porcine vertebral body in the absence of cement leakage), the average maximal temperature at the anterior cortex was 42.4 ± 2.2°C; at the neural foramen 39.5 ± 2.1°C; at the posterior cortex 40.0 ± 2.5°C and at the vertebral center, 68.1 ± 3.4°C.

For any exposure level, the profiles were the same for both types of excitation and the maximal temperature rise was achieved at the focus.

The average maximal temperature was 42.7 ± 2.4°C at the anterior cortex; 41.1 ± 0.4°C at the neural foramen, 59.1 ± 7.6°C at the posterior cortex and 77.3 ± 5.7°C at the vertebral center (Table 1).

The hydrostatic pressure at the maximal temperature can be proposed as a such phasing factor.

The purpose of this paper is to evaluate the influence upon the liquefaction yield of the three operating variables, the maximal temperature (150 280 °C), the reaction time at maximal temperature (20 60 min) and the amount of added H2SO4 (0–1.5% on dry wood).

The first- and second-order Raman spectra of carbon nano-onions (CNOs), produced via annealing of detonation nanodiamonds with a mean grain size of ∼5 nm in the argon ambience at the maximal temperature of annealing process (TMAX) varying from 1500 to 2150 °C, are analyzed together with the high-resolution transmission electron microscopy (HRTEM) images.

Thermal stress: sea water was heated from 17°C to 24°C over 2·hrs and maintained at this maximal temperature for 5·days.

Slides were allowed to dry overnight in a dust free incubator at a maximal temperature of 37°C.