Sentence examples for maximal power of from inspiring English sources

Nitric oxide (NO) has been demonstrated to enhance the maximal shortening velocity and maximal power of rodent muscle.

The methodology presented in this paper allows selecting the optimal size of the heat exchangers (condenser and evaporator), the optimal mass flow rates and the maximal power of fans and pumps for an application specific ORC.

Comparison of proposed fuel assemblies was realized by length of a batch, average burnup, maximal power of fuel assembly or fuel pin, control fuel assembly worth, reactivity coefficients, and effective delayed neutrons fraction.

By focusing the high power picosecond laser in LBO crystal, 532 nm green laser with maximal power of 20.8 W is generated and the conversion efficiency of second-harmonic generation reaches 56.4% when 17.7 W green laser obtained from the fundamental frequency laser with power of 31.4 W and beam quality of M2 < 1.25.

As such maximal power of 23 dBm is used to transmit PUCCH signal.

Then begin{aligned} s_n=alpha _k(g), end{aligned}where (p^k) is the maximal power of p dividing n.

Therefore, the maximal power output of a mixed muscle is lower than the sum of the maximal powers of its slow and fast fibers.

Images were recorded using a 60×, NA 1.2 water immersion objective (Olympus) and Evolve 512 EMCCD camera (Photometrics) with gain set at 50, frame rate at 50 Hz, and maximal powers of 647, 561, or 405 nm lasers set at 8, 8, or 0.05 kW cm 2, respectively.

Theorem 1. ( k -FTConnectivity, N, of FTTC k ) If the maximal power graph of all FT-nodes is k -connected, then the backbone network obtained by FTTC k is also k -connected.

When the MFC was loaded with a 20 KΩ resistor, the gold electrode supported maximal power density of 3.77±0.02 mW/m2 at a current density of 16.47±0.04 mA/m2.

The proposed methodology achieves maximal power reduction of functional units by identifying the maximal parallelism of power hungry operators in resource-constrained/time-constrained designs.