Sentence examples for maximal power level from inspiring English sources
Moreover, the system reaches the maximal power level faster and stays there longer.
Moreover, the probability of choosing the maximal power level p N is expressed as (delta _{N}=Pr left {tilde p_{o}ge p_{N}right }) and it can be obtained as: delta_{N}=expleft[-frac{ 1-tau)(p_{N}=expleft[-frac{ 1-tauau p_{mathrm{e}}miN}=expleft[-frac{ 1-tau)}right].
Then, taking into account the rejection capabilities of TV channelization filters (a cautious value is typically 30 dB), and a safety margin of 3 dB, it can be concluded that opportunistic system maximal power level should be set to 4 dBm (2.5 mW) equivalent isotropically radiated power (EIRP) in channels adjacent to DTT services.
After determination of the maximal safety power level, the zone was treated with RFAL until the temperature-controlled power cutoff limit was reached, which then was maintained at this level for 1 to 2 min to ensure uniform heating.
The maximal probability of choosing each power level has been obtained in (5), and it is plotted in this figure.
The conclusion is therefore that repeated blood donations reduce adaptations to training, at least at the level of maximal power output.
Consequently, it is more likely to choose the low power level and the maximal probability of choosing the given power level shifts to the right on the time line.
For example, in scenario 1 with 10,000 subjects in each group, recessive MOI, relative risk 2.2, and level of significance 0.0001, the maximal power is 38% with 40 genotypings compared to 77% with 640 genotypings.
Cross correlation of the tidal signal with the time-series of power level in these frequency bands shows that maximal acoustic output lags the M2 tidal component by ∼115 127° (Figure 6).
The proposed transmit power control strategy is based on the balancing of the SU transmit power level between minimal required to satisfy QoS requirements and maximal permissible level in order to avoid interference with the PUs.
As presented in Table 2, we performed analyses for four BS Tx power levels and even for the lowest Tx power level (10 W), DL coverage of the BS sector is higher than the maximal coverage range of UT in the UL direction.
