The trapezoidal load-displacement curves (as those shown in Fig. 1 for As40Se60 and Ga3(As0.40Se0.60)97 glasses) were detected simultaneously for maximal load of 10 mN and loading-unloading rate of 20 mN/min, the dwell time at maximal loading being set to 15 s.
Therefore, a loading force of 60% of the maximal load was applied.
Its loading parameters were recorded and the value corresponding to 60% of the maximal load was determined from the load-deflection curve.
Load corresponding to 50%, 60 %, 65, and 70% of the mandmal load was applied (number of samples tested = 11) and the mean number of cycles necessary to break the bone was recorded.
Hence, innovative technologies, like multi-stage biogas plant concepts [26 28] or gasification CHPs for solid biomass [29] with larger bandwidth for load changes or spread between minimal and maximal load, are more likely to be realized after the year 2022.
In the single cycle loading tests, significant differences in maximal load were documented.
Other physical and mechanical properties such as density and maximal load were the same or even increased as in the case of strain.
Since the tested DRC flows under loading, especially those, which are insufficiently polymerized (Fig. 1b), the maximal loading force was applied for 180 s.
It has to be mentioned, however, that the snakeplate can not be contoured and the maximal loading strength is inferior to titanium alloy implants.
For example, let us assume that almost maximal SR load was produced by our experimental conditions in the rat species, and that a tightly controlled SR luminal Ca2+ threshold exists beyond which sparks and waves occur.
