Sentence examples for maximal load at from inspiring English sources

During sustained maximal load, AT diameter and bone MRI short τ inversion recovery signal (hinting at subtle oedema) increases.

HMWPP mesh decreased from maximal load at failure 59.3 N at 1 month to 36.0 N at 5 months, while LWPP mesh decreased from 61.5 to 37.8 N at 5 months [ 77].

However, there were no significant differences between the locking and non-locking constructs in terms of median maximal displacement (3.99 mm (sd 1.4) versus 2.40 mm (sd 0.5), respectively; p = 0.22) or maximal load at failure (641 N (sd 22) versus 626 N (sd 40), respectively; p = 1) (Table I).

The maximal loads at failure observed during the fatigue tests were all smaller than the threshold value of 2.4 kN (Table 6).

The load-deflection curve was obtained in real time, and maximal load and load at the yield point were assessed (TESC software, version 13.4) to represent the general bone integrity and the strength within the elastic phase [ 22].

After three weeks of tail suspension, the bone strength at the tibia in the unloaded group (HS) was 28.5% weaker (measured by maximal load and load at the yield point) than that of the bones from the control rats (44.7 N versus 62.3 N for maximal load and 36.4 N versus 51.3 N for load at the yield point, P < 0.001).

This computational model, depicted visually in Fig. 2, provides maximal load balancing at essentially no cost, as workers are free to independently obtain work as often as they become available.

The screw head breaks off under maximal load usually at the end of the insertion.

Mean maximal load, stiffness and energy-at-failure were all greater than the values in controls.

The corresponding strain maps at maximal load showing the transverse strains εxx(B) and longitudinal strains εyy(C) are also given.

At maximal load, a 10-second holding period was applied before the hardness parameters were read.