Sentence examples for maximal fill time from inspiring English sources

Peptide fragments were analyzed with a maximal fill time of 300 ms and automatic gain control target value of 10,000.

Maximal fill times were set to 250 and 100 ms for MS and MS/MS scans, respectively.

Normalized collision energy of 35%, activation Q 0.250 and activation time 30 ms in the LTQ after the accumulation of 10,000 ions were used with maximal filling times of 1,000 ms for the full scans and 150 ms for the MS/MS scans.

The mass spectrometer was operated in the sensitive mode with the following parameters: capillary voltage 1400 V; end plate offset, 500 V; dry gas, 10.0 l/min; dry temperature, 160°C; aimed ion charge control 150000; maximal fill-time 500 ms. The nano-ESI source (Bruker Daltonics, Germany) was equipped with distal coated SilicaTips (FS360-20-10-D; New Objective).

Maximal filling times were 1000 ms for the full scans and 150 ms for the MS/MS scans.

Maximal filling times were 250 ms for the full scans and 60 ms for the MS/MS scans.

Assuming that no sperm is lost during copulation, the limited sperm supply of dispersing winged males would therefore be sufficient for 10 (maximal fill) to 24 (average fill) additional matings.

Horizontal and vertical long-axis cine images were used to obtain images of the left atrium at maximal filling.

We were able to find a 7-point filling function (i.e. the input flow as a function of time) giving the shortest filling time to reach a stored hydrogen mass for a given heat transfer coefficient while keeping the reservoir internal temperature and pressure under their maximal safe values.

Note that the filling stage should be allowed sufficient filling time to reach the steady state.

The filling time and stability of the fill phase are very important for the clutch control.