Your English writing platform
Discover LudwigSuggestions(1)
Exact(2)
Currents measured immediately after the final step to −140 mV, were normalized by the maximal current (Imax) and plotted as a function of the preceding membrane potential (Fig. 4A, indicated by a grey arrow).
In agreement with a previous report [28], and our optical measurements, after 10 min. incubation with 5 mM MβCD we observed an increase in the maximal current (Imax) at +180 mV (Figure 5B).
Similar(58)
The maximum bioelectrocatalytic current (imax) of 3.12 mA cm−2 was obtained on carbon electrode derived from corn stem.
From the emission characteristics, the maximum emission current (Imax, μm) and turn-on voltage (Von, V) of the CNTs were estimated by defining the Imax as the emission current measured at the applied voltage of 1.2 kV and the Ion as the voltage applied to obtain the emission current of 10 μA.
The time course of recovery of IK from inactivation was fitted with a mono-exponential function: I/Imax = A*{1 exp[−Δt/τ]}, where Imax is the maximal current amplitude; I is the current after a recovery period of Δt; τ is the time constant; A is the amplitude coefficient.
This extended re-release resulted in the film's run time approaching the current IMAX platter maximum of 170 minutes, thereby leaving less time for the end credits.
Concentration dose response curves were fit to an equation of the form: I / I MAX = A m p 1 + (K D [ C a ] ) H where I denotes current, IMAX is the maximum current elicited by the highest concentration of divalent cation, Amp is the maximum value of I/IMAX at a given voltage, K D is the apparent dissociation constant, and H is the Hill coefficient.
Binned data were fit with a Boltzmann function I = Imax/(1+exp - T-T50/k)) where I is normalized current, Imax is the plateau, T is tension, T50 is the tension of half-maximal activation, and k is the slope factor.
For each receptor, maximal GABA-induced currents (Imax) were typically 0.4 1 μA at a holding potential of −60 mV (see examples in Figure 3).
Legend now faces a challenge from another Working Title production, Everest, which is achieving impressive screen averages with its current Imax previews.
(14) Here (mathrm{imax}_{i;j}) is the absolute value of the maximal current contribution to voltage node j within partition i, and Pi represents the MNA unknowns (x_{i}) and those MNA unknowns from (x_{c}) that contribute to partition i.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com