Sentence examples for matrix pixel size from inspiring English sources

Static images were acquired for 300 s, using the same matrix, pixel size and energy settings as for the whole body images.

WB images (15 cm/min, 1024 × 512 matrix, pixel size 2.80 mm) were performed immediately following administration, at 1, 4 6 and 24 h post-injection (pi).

Images were reconstructed by 3D iterative reconstruction (3DIR) provided by the manufacturer into 47 image planes (separation 3.27 mm) and into a 128 × 128 pixel image matrix (pixel size 2.1 × 2.1 mm2.1

Static images (5 min, 256 × 256 matrix, pixel size 2.33 mm) of hands and feet were acquired immediately following the first WB scan, at 4 6 and 24 h.

One hour, and 1, 2, and 7 days after onset of the 177Lu-octreotate infusion anterior and posterior whole body scintigraphy was performed (scanning speed of 10 cm/min, 20% energy-window centered over the 208-keV photon peak, 256 × 1,024 matrix, pixel size of 2.06 mm (IRIX) and 2.21 mm (Millennium)).

Tc-99m HMDP SPECT data were also reconstructed on a 128 × 128 matrix (pixel size, 4.4 mm) with 3D OSEM (five subsets; 10 iterations) and Butterworth filter (cutoff frequency, 0.33 cycle/cm; order, 10) using attenuation and scatter correction (dual-energy window method) and resolution recovery with Evolution for Bone (GE Healthcare).

For the reconstruction, a 208 × 208 matrix size (pixel size 2 mm) was used and a post-reconstruction Gaussian filtering with 6-mm FWHM was applied.

The data were acquired in a 128 × 128 matrix with pixel size and a slice thickness of 0.2 mm.

Images were reconstructed using the iterative method RAMLA LOR-3D, with a 144 × 144 matrix and pixel size of 4 × 4 × 4 mm3.

Data were acquired in list mode in a 184 × 184 × 31 matrix with pixel size of 0.25 × 0.25 × 1.175 mm and a coincidence window width of 22.22 nsec.

For CT images, filtering to SPECT spatial resolution using the B08s filter, which was called by the manufacturer, interpolation to equate the matrix and pixel sizes to those of TCT attenuation map, and conversion from Hounsfield units to attenuation coefficients were performed using Syngo MI Application, version 7.0.7.14 (Siemens, Knoxville, TN, USA).