Sentence examples for matrices as shown from inspiring English sources

The GC FID is a suitable technique for direct quantification of farnesene in complex matrices as shown by the good calibration curve (R2>0.998, N=5) within the tested concentration range of 1 50 µg/mL and the reproducibility of the intensity (intraday; <10% RSD at each concentration; N=5).

Each metric for each walk is organized into a single matrix, thus for a single walk, there are three matrices, as shown in Table 1.

However, this research paper uses Saaty's (1977) approach, which calculates RI based on the average CI of 500 randomly filled matrices, as shown in Table 3.

However, this property is not always true for γ-diagonally dominant matrices and for product γ-diagonally dominant matrices, as shown in [1].

In order to get around this problem, a bit re-mapping operation is used in the joint decoder to rearrange the systematic code-bits, so that the codewords correspond to sparse matrices, as shown in Figure3.

It can be seen that the computation of order-15 matrix is the combination of three times of order 5 and five times of order 3 of two sparse matrices as shown in Figure 1.

Dependence between toughness improvement and morphology of the resulting blends was established in terms of domain shape, average size and related size-distribution of the dispersed rubbery microdomains within the PLA matrix as shown by SEM, TEM and AFM.

The elimination of these strategies gives the second reduction matrix, as shown in Table 7. Then Y, choosing between "vote for y" and "vote for z" in this matrix, would eliminate the now dominated "vote for y" because that choice would result in x's winning due to the chair's tie-breaking vote.

The phase separation induced by polymerization occurred in the hybrids containing octanitrophenyl POSS (OnpPOSS) and the spherical particles of POSS-rich phase (<0.5 μm in diameter) were uniformly dispersed the continuous epoxy matrix as shown by scanning electronic microscopy.

In this way, the aerogel architecture enables the design of compositions other than Pt/TiO2 or even the co-assembly of further active materials such as conducting components into the aerogel matrix as shown by the addition of m-rGO to the Pt/TiO2 aerogels.

UV lithography allows the fabrication of patterns in the nanofiber matrix as shown in Fig. 8.