Sentence examples for materials with constant from inspiring English sources

The existing simplified method calculating the thermal storage coefficient is only applicable for materials with constant thermal properties.

Numerical results demonstrate that 3D auxetic lattice materials with constant Poisson's ratios can be achieved by the proposed optimization formulation and that two sets of material architectures are obtained by imposing different symmetry on the unit cell.

A heterophasic reactor grade polypropylene-ethylene copolymer (RAHECO®) was diluted with a propylene-ethylene random copolymer to get materials with constant EPR/PE-particle diameter but various interparticle distances.

Al-Zr-TUD-1 materials with constant Si/(Al+Zr) molar ratio of 25 with varying Al/Zr ratios were synthesised by adjusting the molar ratio of SiO2/ x Al2O3/ y ZrO2/tetraethylammonium hydroxide (TEAOH /(0.5 1) TEA/(10 20) H2O.

For simplicity, HTS bulks are usually regarded as a material with constant permeability in the design.

In this research an armor material with constant thickness has been studied.

The rate of thermal conductivity change decreases gradually with the increase of the thermal conductivity of backfill material with constant borehole diameter.

The energy absorption of honeycombs made of a linear elastic-perfectly plastic material with constant and functionally graded density were estimated up to large crushing strains.

The crushing behaviour and energy absorption of honeycombs made of a linear elastic-perfectly plastic material with constant and functionally graded density were studied up to large crushing strains using finite element simulation.

In the present method, the initial stresses in the soil/column are taken into account, with the column considered as an elasto-plastic material with constant dilatancy, the soil as an elastic material and the geosynthetic encasement as a linear-elastic material.

Definitive listings of laminate stacking sequences are derived for balanced plain weave laminated materials, assuming each layer is composed of the same material with constant thickness throughout and that standard ply angle orientations 0, 90, and ±45° are adopted; consistent with industrial design practice.