Sentence examples for materials decrease the from inspiring English sources

Also, the reverse scan of Pt/C electrocatalyst showed a peak around −0.3 V which was attributed to reduced PtOx species and with the increase in Rh content on PtRh/C materials, decrease the intensity of this peak.

The introduction of such carbon materials decreases the decomposition temperature of MgH2.

However, any further increase up to 20% substitution of cement with the supplementary cementitious materials decreased the strength values and elastic modulus of the mixtures at all ages.

Using waste materials decreases the need to use natural resources and hence prevents some irreparable environmental destruction while simultaneously decreasing the impact of waste storage problems on the environmental landscape.

All magnesium-based materials decreased the amount of Ca2+ in this study.

Consequently, using ceria-zirconia as a support material decreases the risk of reactor tube blocking.

In summary, biodeposits of F. enigmaticus can enrich the sediment, but crab activity and water currents can disperse the suspended and/or deposited material, decreasing the OM content of sediment close to the reefs.

We found that the use of the absorbing material decreases the offset in the estimated vertical component of the baseline from ∼27 mm to ∼4 mm when the elevation cutoff angle varies from 5° to 20°.

Densification of the material decreases the amount of compressed gas within the storage vessel and, as a result, the global mass storage capacities were found to decrease with the compacting force.

It is noteworthy to mention that the band bending supports either holes or electrons transport to the surface depending on the direction of the potential, thereby the opposite charge carrier is trapped in the bulk of the material decreasing the photoactivity of the catalysts.

The influence of the FIB processing parameters on the morphology of the catalyst surface and the growth of the CNT forest was investigated, including the removal of redeposited material, decreasing the average surface roughness (from 0.45 to 0.15 nm), and a decrease in the thickness of the Fe catalyst.